1. Indonesia
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Panel Bonding Adhesive, 08115, 200 mL Cartridge, 6 ea/Case

3M™ Panel Bonding Adhesive, 08115, 200 mL Cartridge, 6 ea/Case

  • 3M ID 7000000610
  • UPC 00051135081150,50051135081155

A high performance two component epoxy adhesive

Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components. Also use to reinforce welded or riveted structural components

Product has corrosion inhibiting formula

View more details

Details

Highlights
  • A high performance two component epoxy adhesive
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components. Also use to reinforce welded or riveted structural components
  • Product has corrosion inhibiting formula
  • Has excellent shelf life, either opened or unopened
  • Heat accelerated curing
  • Glass beads work as built-in spacers for optimum bond line thickness
  • It can be spot welded through or used in conjunction with rivet bonds

The 3M™ Panel Bonding Adhesive is a two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins.

3M™ Panel Bonding Adhesive is an innovative and cost-effective 2-part cartridge system for bonding replacement body panels. Seals and bonds steel, aluminium, SMC, and FRP securely in a single operation. Reduces welding time, protects against corrosion and gives excellent adhesion to a variety of substrates. Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates. When the manufacturer's directions are followed, this product can be used to bond door skins, roof skins, quarter panels and box sides. It can be spot welded through or used in conjunction with rivet bonds. In addition, product can be used for bumper cover repair under certain conditions. This product is not intended to bond structural components of a vehicle such pillars, rockers, or frame members. If doubt exists as to whether a particular component is structural, then that component should be welded. Recommended for application with 3M manual gun 08117 or 3M pneumatic gun 09930.

Typical Properties