3M™ Steri-Vac™ Sterilizer/Aerator 8XL, 1 Door

3M ID 7000002675UPC 00707387447885
  • Ethylene oxide is a proven, efficacious sterilant offering maximum assurance that instruments are sterilized
  • Large chamber nearly doubles sterilizing capacity compared to other models
  • Built-in aeration begins automatically after sterilization and reduces potential for EO exposure
  • Optional remote operation panel enhances operator safety, and allows operator to program up to four 8XL units
 More
View all details
Details

Catalog number 8XLP is a single door, dual cycle 7.9 cubic foot (223,7 liter) chamber EO gas sterilizer/aerator with relative humidity monitoring and control. A full-size lower and two half-size upper baskets are included

Our largest capacity EO sterilizer. A single unit-dose EO cartridge is punctured inside the negative pressure chamber only when proper chamber conditions are achieved. The extra-large chamber with a full-sized lower basket and two half-size upper baskets provides economical processing of large loads or larger surgical instruments. The model 8XL features a sensing system that continuously monitors and controls relative humidity during the pre-conditioning phase to optimize moisture required for the exposure cycle (two temperature cycles: 55°C and 37°C). Dependable computer controlled electronic design provides accuracy, and automatically stops the cycle and displays codes if an error is detected. Digital display continuously shows cycle status.

  • Ethylene oxide is a proven, efficacious sterilant offering maximum assurance that instruments are sterilized
  • Large chamber nearly doubles sterilizing capacity compared to other models
  • Built-in aeration begins automatically after sterilization and reduces potential for EO exposure
  • Optional remote operation panel enhances operator safety, and allows operator to program up to four 8XL units
  • The only hospital EO sterilizer with a direct RH sensor to document, control and provide optimal humidity to each load
  • No CFCs or HCFCs mean a low temperature sterilization system that's compatible with the environment
  • Low cost per cycle offers cost-effective means of low temperature sterilization
Specifications
Product Type
Sterilizer
Sterilization Method
Ethylene Oxide (EO)