Introduction to Surface Energy

The Basics of Surface Energy

All materials have properties such as density or melting point that help us characterize and differentiate between them. Surface energy is another property of materials: it’s a measure of how attracted a material’s molecules are to each other and to other materials’ molecules. Surface energy is a good measure of how easy or hard the surface may be to adhere.

See how different levels of surface energy can make a material hard or easy to bond.

What is Wet Out?

“Wet out” or “wetting” occurs when a liquid flows or spreads out when applied to the surface of a solid. Wetting allows the adhesive to achieve intimate contact with the surface of a material to be bonded. Depending on the surface energy of the material, an adhesive will naturally wet and flow over the surface or have a tendency to bead up. Wet out is a necessary condition to form an adhesive bond.

Good wet out - water spreads out
Poor wet out - water beads up

Wetting out on Higher- and Lower-Surface-Energy Materials

Materials with higher surface energy are easier to wet out than materials with lower surface energy. Consider the sauce pans in the images above. If the pan has a higher surface energy, the water droplets will flow across the surface into a thin film. If the pan has a lower surface energy (perhaps by adding a non-stick coating), the water droplets will bead up. This will be explored more in the next sections.

Measuring Surface Energy

How easy or hard it is for an adhesive to wet out a material’s surface depends on the surface energy of the material. Surface energy is, as you might expect, expressed in units of energy per area. Typically, it is measured in a unit called “dynes” where 1 dyne/cm is equal to 1 mJ/m.

Most commonly, surface energy is measured with water. When a droplet of water is placed on a surface, it will bead up to some extent. Theoretically, if the surface energy is zero, the droplet will be a perfect sphere. Conversely, if the surface energy is infinitely high, the droplet will form a perfectly uniform film. For anything in between, we can measure the angle made at the edge of the droplet. (For a sphere, that angle would be 0°; for a film, it would be 180°.)

In case you were wondering:

Why use water for measuring surface energies?

Water is a common choice for measuring surface energy for a few reasons. Most importantly, it is readily available. It is also easy to purify, relatively inexpensive, low viscosity, and achieves equilibrium very quickly on the surface – typically within 60 seconds. Imagine using something like pitch to measure surface energy. It may take a few hundred years!

Learn about the Pitch Drop experiment, the world’s longest running lab experiment

The Science of Adhesion Educational Series

The Science of Adhesion Educational Series is designed to be a comprehensive introduction to Adhesion Science and the use of tapes and adhesives in design applications. Visit the Science of Adhesion page to view all articles or choose from the selected topics below.

Industrial Adhesives & Tapes | Ask A 3M Expert

Thank you for your interest! Please complete the form below to receive your tape or adhesives sample or enter your question or comment below.

Industrial Users Only

Disclaimer: The 3M Industrial Sample Request Program is not available to consumers or the general public. We reserve the right to disqualify without notification any sample request that does not appear to be for industrial manufacturing purposes. Samples are available to U.S. industrial customers only. Only one sample per qualified customer. You will be contacted to verify your request. If you are a 3M Distributor, contact your 3M Sales Representative. Quantities available while supplies last.

We will respond to your email request in 24 - 48 business hours.

All fields are required unless indicated optional

Business Email Address
First Name
Last Name
Company Name
Phone Number
Country/Region
Zip or Postal Code
Industries
Other Industries
Application Purpose
Company Type
My Role
Other Role
Timeline
Project Status
Manufacturing Status
Request a Sample
Application
Other Application
Describe Your Challenge or Application
I would like to receive email updates and special offers from 3M Industrial Adhesives & Tapes.
3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.
Submit

Thank You

Thank you for your interest in 3M Industrial Adhesives & Tapes products. A 3M representative will contact you shortly regarding your inquiry.

Our Apologies...

An error has occurred while submitting. Please try again later...

CHAT WITH US